[Q&A] Update Firmware

admin

1.Put Update.bin in U flash disk.

2.Power off the 3d printer,Insert the Uflash disk,and power on the 3d printer.

3.And the screen will be white for 20s and then will uploade.

4.Main menu will appear.and then put the U flash disk out from the 3d printer and power off.

pityucime

admin Posted at 2020-11-3 08:53
Hello, can you tell me your e-mail?

1. pityucime@gmail.com

Copy the code

royalbert867

Hello! I understand you're facing an issue with your MakerPi M1 firmware, but it seems like you might have included the keyword streameast soccer accidentally. If you have any questions or need assistance with your MakerPi M1, feel free to ask, and I'll do my best to help you resolve the firmware issue.

admin

cvenegas Posted at 2022-6-27 22:43
Hi, I have a doubt. On the website I found two different versions of firmware.
Can you send me or in ...

Please provide your email to me .Thank you ,Or you can contact :sales04@soongon.com

cvenegas

Hi, I have a doubt. On the website I found two different versions of firmware.
Can you send me or indicate which is the LASTEST update for the MakerPi M1 printer?

Thanks a lot.

sunshine

Madison0427 Posted at 2020-12-5 00:07
Hello. I recently got a MakerPi M1 and i think the firmware is broken. How can I update/fix the firm ...

Hello dear friend ,on our website have M1 printer firmware,you can download there.thank you

3d_ME

Nevermind.  Out of frustration... I physically rewired the stepper motor and it seems to work now.

3d_ME

admin Posted at 2021-1-15 13:41
Put the firmware into the SD card, insert it into the machine, and then restart it and it will upd ...

Any ideas on why the firmware has my Y  axis inverted?

3d_ME

Still trying to figure this out.  There is no way of "configuring" the limits of the printer in the Cura software (19.08.15) to adjust the Y travel direction and limits.  I tried to build the firmware from the github here (https://github.com/MakerPi3D/Marlin/tree/soongon_4_2.0.x) but I'm not having any luck and don't want to break it worse.

3d_ME

Hello there,  Maybe you can help me.  I'm not sure why, but my MakerPI M1 is having trouble homing correctly....  

When I first got it, it worked fine.  But I went to use it this week, and it's having trouble homing correctly.   Initially, it was the X axis (the bed) that was having trouble.  It would home correctly against the limit switch, then it would over-extend itself in the opposite direction.

After installing new firmware from here (https://drive.google.com/u/1/uc? ... amp;export=download) the Y axis seems to have trouble homing correctly now as well. It moves in the wrong direction !  instead of moving down to meet the table, it moves upward off it's limits as well!  

Any idea what could be wrong?

admin

sumo Posted at 2021-1-15 02:11
How to update firmware on MakerPi M1?
Is there any way to know what changed in the firmware? (is th ...

Put the firmware into the SD card, insert it into the machine, and then restart it and it will update automatically.
https://github.com/MakerPi-3D/Marlin/tree/soongon_4_2.0.x  This is the open source code for M1.