P3 pro cannot connect usb to windows 10

floaqua

I have a makerpi P3 pro, I'm generally happy with it for use with a usb key.
However, I can't connect via the usb cable to my Windows 10 PC.
I installed the windows driver usber.sys version 10.0.19041 2130, but I can't connect neither with the repetier tool nor with octoprint for windows.
machine information:
model: P3 PRO
Function Base+CM+POR+MC+BL3+V5
FIRMWARE D20220429-V1.5.1-V1.2

Should I install another driver on my PC or should I change the Firmware of the machine?
Thank you in advance for your feedback.


terminal octopi:
Changing monitoring state from "Offline" to "Opening serial connection"
Connecting to port /dev/ttyACM0, baudrate 9600
Changing monitoring state from "Opening serial connection" to "Connecting"
Connected to: Serial<id=0xaab577d0, open=True>(port='/dev/ttyACM0', baudrate=9600, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: Error:checksum mismatch, Last Line:  checksum: 125
Recv:
'N0 M110 N0 '
Recv:
ccm_param.command_buffer:78; checksum:78
Recv:
ccm_param.command_buffer:48; checksum:126
Recv:
ccm_param.command_buffer:32; checksum:94
Recv:
ccm_param.command_buffer:77; checksum:19
Recv:
ccm_param.command_buffer:49; checksum:34
Recv:
ccm_param.command_buffer:49; checksum:19
Recv:
ccm_param.command_buffer:48; checksum:35
Recv:
ccm_param.command_buffer:32; checksum:3
Recv:
ccm_param.command_buffer:78; checksum:77
Recv:
ccm_param.command_buffer:48; checksum:125
Recv:
0
Recv:
Resend: 1
Recv:
ok
Send: N0 M110 N0*125
Changing monitoring state from "Connecting" to "Operational"
Recv:
Error:checksum mismatch, Last Line:  checksum: 125
Recv:
'N0 M110 N0 '
Recv:
ccm_param.command_buffer:78; checksum:78
Recv:
ccm_param.command_buffer:48; checksum:126
Recv:
ccm_param.command_buffer:32; checksum:94
Recv:
ccm_param.command_buffer:77; checksum:19
Recv:
ccm_param.command_buffer:49; checksum:34
Recv:
ccm_param.command_buffer:49; checksum:19
Recv:
ccm_param.command_buffer:48; checksum:35
Recv:
ccm_param.command_buffer:32; checksum:3
Recv:
ccm_param.command_buffer:78; checksum:77
Recv:
ccm_param.command_buffer:48; checksum:125
Recv:
0
Recv:
Resend: 1
Recv:
ok
Send: N0 M110 N0*125
Recv:
Error:checksum mismatch, Last Line:  checksum: 125
Recv:
'N0 M110 N0 '
Recv:
ccm_param.command_buffer:78; checksum:78
Recv:
ccm_param.command_buffer:48; checksum:126
Recv:
ccm_param.command_buffer:32; checksum:94
Recv:
ccm_param.command_buffer:77; checksum:19
Recv:
ccm_param.command_buffer:49; checksum:34
Recv:
ccm_param.command_buffer:49; checksum:19
Recv:
ccm_param.command_buffer:48; checksum:35
Recv:
ccm_param.command_buffer:32; checksum:3
Recv:
ccm_param.command_buffer:78; checksum:77
Recv:
ccm_param.command_buffer:48; checksum:125
Recv:
0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Errorine Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Recv:
ok
Send: N1 M115*39
Recv:
Error:Line Number is not Last Line Number+1, Last Line: 0
Recv:
Resend: 1
Printer keeps requesting line 1 again and again, communication stuck
Changing monitoring state from "Operational" to "Error"
Send: M112
Send: N2 M112*35
Send: N3 M104 T0 S0*34
Send: N4 M140 S0*97
Changing monitoring state from "Error" to "Offline after error"
Connection closed, closing down monitor
Closing down send loop

Jay_Jay

i have this issue, is there a fix?

admin

Hello Friend,thank you for your feedback ,You can conatct this email :sales04@soongon.com