MakerPi 3d BBS

Title: M1 leveling file [Print This Page]

Author: ExPrezes Time: 2021-6-13 23:58
Title: M1 leveling file
Hi,

I have recently bought M1, which is quite capable printer.

Unfortunately, microSD card broke and I have lost the LEVELLOG.TXT file, which was apparently leveling map for this particular printer.
Do you know maybe if there is any "magic" trick to run the leveling procedure that would create this file with leveling map again?

Thanks for any ideas!

Author: sunshine Time: 2021-7-26 10:32
Can I get your email,I can sent the file to you.This is my email:sales04@soongon.com

Author: ExPrezes Time: 2021-8-10 16:36

sunshine Posted at 2021-7-26 10:32
Can I get your email,I can sent the file to you.This is my email:sales04@soongon.com

Thank you for responding, but I don't think that using your file would help - as far as I recall the content of the file, it was printer-specific, with specific values for particular unit, based on some leveling procedure done during unit production :/

Author: sunshine Time: 2021-8-11 11:59
Can you give me your email?I can send you the firmware to you.This is my email:sales04@soongon.com,you can send problem to my email.

Author: ExPrezes Time: 2021-8-18 03:12

sunshine Posted at 2021-8-11 11:59
Can you give me your email?I can send you the firmware to you.This is my email:sales04@soongon.com,y ...

Hello sunshine - I have just written an email to you, will be grateful for support. Thank you!

Author: sunshine Time: 2021-8-19 15:13
can you provide the machine number ?It will help me to know when your machine was purchased and send you the corresponding firmware

Welcome MakerPi 3d BBS (https://enbbs.makerpi3d.com/)