MakerPi 3d BBS
Title: [Q&A] Update Firmware [Print This Page]
Author: admin Time: 2020-10-19 16:47
Title: [Q&A] Update Firmware
1.Put Update.bin in U flash disk.
2.Power off the 3d printer,Insert the Uflash disk,and power on the 3d printer.
[attach]6[/attach]
3.And the screen will be white for 20s and then will uploade.
[attach]7[/attach]
[attach]8[/attach]
4.Main menu will appear.and then put the U flash disk out from the 3d printer and power off.
Author: pityucime Time: 2020-10-28 05:37
hi..please help!
i have 3d printer makerpi m1.....the firmware is broken..please send me the .bin file.
Author: www Time: 2020-10-29 21:58
where to download firmware (for k5)?
Author: quocanhcgd Time: 2020-11-2 17:07
From Facebook. Or you write your email. they send to you
Author: admin Time: 2020-11-3 08:53
Hello, can you tell me your e-mail?
Author: admin Time: 2020-11-3 08:55
Hi, you can join our Facebook group, the file we upload on Facebook.
Author: pityucime Time: 2020-11-9 02:57
Author: pityucime Time: 2020-11-29 19:55
Hello, email is: pityucime@gmail.com
Author: admin Time: 2020-11-30 10:44
Do you need any other help? The firmware has been sent to you before.
Author: Madison0427 Time: 2020-12-5 00:07
Hello. I recently got a MakerPi M1 and i think the firmware is broken. How can I update/fix the firmware?
Author: admin Time: 2020-12-8 16:52
Hello, can you share your e-mail to me?
Author: admin Time: 2020-12-9 13:33
Please leave your email and we will send you the latest firmware.
Author: Madison0427 Time: 2020-12-10 21:20
Thank you but I already got the latest firmware by email yesterday. I will see if that works.
Author: sumo Time: 2021-1-15 02:11
How to update firmware on MakerPi M1?
Is there any way to know what changed in the firmware? (is there changelog for the firmware?)
Thanks!
Author: admin Time: 2021-1-15 13:41
Put the firmware into the SD card, insert it into the machine, and then restart it and it will update automatically.
https://github.com/MakerPi-3D/Marlin/tree/soongon_4_2.0.x This is the open source code for M1.
Author: 3d_ME Time: 2021-2-11 12:59
Hello there, Maybe you can help me. I'm not sure why, but my MakerPI M1 is having trouble homing correctly....
When I first got it, it worked fine. But I went to use it this week, and it's having trouble homing correctly. Initially, it was the X axis (the bed) that was having trouble. It would home correctly against the limit switch, then it would over-extend itself in the opposite direction.
After installing new firmware from here (https://drive.google.com/u/1/uc? ... amp;export=download) the Y axis seems to have trouble homing correctly now as well. It moves in the wrong direction ! instead of moving down to meet the table, it moves upward off it's limits as well!
Any idea what could be wrong?
Author: 3d_ME Time: 2021-2-14 07:57
Still trying to figure this out. There is no way of "configuring" the limits of the printer in the Cura software (19.08.15) to adjust the Y travel direction and limits. I tried to build the firmware from the github here (https://github.com/MakerPi3D/Marlin/tree/soongon_4_2.0.x) but I'm not having any luck and don't want to break it worse.
Author: 3d_ME Time: 2021-2-14 08:23
Any ideas on why the firmware has my Y axis inverted?
Author: 3d_ME Time: 2021-2-14 08:37
Nevermind. Out of frustration... I physically rewired the stepper motor and it seems to work now.
Author: sunshine Time: 2022-3-7 14:17
Hello dear friend ,on our website have M1 printer firmware,you can download there.thank you
Author: cvenegas Time: 2022-6-27 22:43
Hi, I have a doubt. On the website I found two different versions of firmware.
Can you send me or indicate which is the LASTEST update for the MakerPi M1 printer?
Thanks a lot.
Author: admin Time: 2022-6-28 08:42
Please provide your email to me .Thank you ,Or you can contact :sales04@soongon.com
Author: royalbert867 Time: 2023-9-23 20:55
Hello! I understand you're facing an issue with your MakerPi M1 firmware, but it seems like you might have included the keyword streameast soccer accidentally. If you have any questions or need assistance with your MakerPi M1, feel free to ask, and I'll do my best to help you resolve the firmware issue.
| Welcome MakerPi 3d BBS (https://enbbs.makerpi3d.com/) |
Powered by Discuz! X3 |